Description:

*Brand new high quality

*Made of high quality material, practical to use

*Used for the ring style friction saver

*With a loop lanyard to attach throw rope

*Suitable for tree arborist to take care of trees

Specification:

*Material: Plastic

*Color: Black

*Diameter: 27mm/1.06in

*Weight: 15g

Use steps:

Step 1: Tie the rope-throwing bag to the tow rope, pass it through the big ring, throw it over the treetops.

Step 2: After unlocking the rope throwing bag, use the tow rope to pass through the small loop then tie the rope thrower again pull down the rope.

Step 3: Pull down the rope. Throwing the rope bag will drive the small ring up.

Step 4: The rope-throwing bag drives the small loop through the treetops the tree-climbing belt has been hung on the treetops. Put down the rope-throwing bag at this time.

Step 5: Untie the rope-throwing bag, tie the main rope with a tow rope as shown in the figure, then pull it up, allowing the main rope to pass through the large small loops.

Step : After the main rope passes through the large and small loops, fix -one end of the rope, and you can operate on the rope at this time.

Step 7: After use, tie the climbing ball and the traction rope with the main rope, and pull down the main rope.

Step 8: The tree climbing ball will pass through the big ring and then bring down the sling ring.

Step 9: Pull down the main rope with -one hand and hold the traction rope with the other hand to prevent the sling loop from falling down and hurting people due to gravity.

Step 10: Remove the sling ring and tree climbing ball.

Step 11: Pull down the traction rope and place it in the rope frame. The is complete.

Package Includes:

1 x Arborist Retriever Ball

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.